Local vendor for stainless hard line?

**Ricersux** · #1 08-24-2010, 09:59 AM

I'm trying to find a supplier for some 1/2 od stainless tubing. I figured someone here has done some hard lining of a nos system or fuel lines etc. Where can I find tubing and fittings locally?

**91silvia** · #2 08-24-2010, 11:48 AM

I would think Earl's would have exactly what you need. Make a call up there and see what they have.

**Ricersux** · #3 08-24-2010, 12:05 PM

I thought about earls but most of their products are geared toward hose and not tube and they are pretty expensive.

**newby_j** · #4 08-24-2010, 02:41 PM

I bought 3/16 stainless from them

**Ricersux** · #5 08-24-2010, 05:07 PM

I have found out that Fastenal has the fittings I am looking for....and I have found stainless 1/2inch OD tubing for $4 a foot!!!

**Ricersux** · #6 08-25-2010, 04:38 PM

FYI...I talked to Earls...they wanted $13.64 per foot of 1/2" stainless tubing!!

**spooledsol** · #7 08-25-2010, 10:07 PM

how many ft do you need I have some with fittings

**Ricersux** · #8 08-26-2010, 02:31 PM

Im looking for around 15 to 20 feet...i have my fittings figured out...going with swagelok fittings.

**spooledsol** · #9 08-26-2010, 05:49 PM

let me see how much is in shop, swagelock is way to go. do you have bender and tubing cutter? if not let me know. will let you know tommorow am

**Ricersux** · #10 08-26-2010, 06:41 PM

I don't have a bender but I was planning on buying a rigid pro series bender....i have a small hack saw to cut the tubing as I have heard a normal tubing cutter wont do shit for stainless. Swagelok seems to be some badass fittings...they should be when a single tee fitting is close to $30 it adds up real quick but I want to do it right.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode