Well the weather wasn't too bad yesterday so I got probably about 99% of the work done on these. I tried to take pics as I went along. They turned out to be a HUUGE BITCH! I thought the hardest part would be getting the existing fenders off of the Jeep w/ old corroded bolts and shit breaking. That acutally turned out to be the easiest part.
Clearing out space to get the existing fenders off.
Took about 30-45 minutes to have both front fenders off.
Trimmed up the fenders to a little closer shape to the final product.
Laid out all of the tubing and clamped in place to start tacking.
Pretzeled the tubing back out of the fender skin and did the finalized welding on it.
And after quite a few little hiccups and readjusting of metal They were bolted back onto the Jeep.
All that is left to do is to trim the edges of the sheet metal to a neater finish and attach it to the tubing along the topside. And then of course I will be finishing it all in rhino lining.